Evidence for ion–ion interactions between peptides and anions (HSO4− or ClO4−) derived from high‐acidity acids

The existence of gas‐phase electrostatic ion–ion interactions between protonated sites on peptides ([Glu] Fibrinopeptide B, Angiotensin I and [Asn¹, Val⁵]‐Angiotensin II) and attaching anions (ClO₄^? and HSO₄^?) derived from strong inorganic acids has been confirmed by CID MS/MS. Evidence for ion–ion interactions comes especially from the product ions formed during the first dissociation step, where, in addition to the expected loss of the anion or neutral acid, other product ions are also observed that require covalent bond cleavage (i.e. H₂O loss when several carboxylate groups are present, or NH₃ loss when only one carboxylate group is present). For [[Glu] Fibrinopeptide B + HSO₄]^?, under CID, H₂O water loss was found to require less energy than H₂SO₄ departure. This indicates that the interaction between HSO₄^? and the peptide is stronger than the covalent bond holding the hydroxyl group, and must be an ion–ion interaction. The strength and stability of this type of ion‐pairing interaction are highly dependent on the accessibility of additional mobile charges to the site. Positive mobile charges such as protons from the peptide can be transferred to the attaching anion to possibly form a neutral that may depart from the complex. Alternatively, an ion–ion interaction can be disrupted by a competing proximal additional negatively charged site of the peptide that can potentially form a salt bridge with the positively charged site and thereby facilitate the attaching anion's departure. Copyright © 2014 John Wiley & Sons, Ltd.     

三维轴对称折叠腔CO2激光器的位相锁定

在一新型三维轴对称腔CO2激光器的基础上提出了一种对此激光器位相锁定的方法。通过在输出镜后放置一具有反射和整形作用的凹凸镜，让作为输出注入光束的谐振腔优先起振。此腔输出的光束到达凹凸镜时被其反射。利用重新定义光斑半径的方法，证明此光束能够覆盖其他放电管输出的光束，根据几何光学，此光束能反射进入各个放电管。然后利用光子简并度的概念证明了反射光束能够控制腔内的本征模式，并且数值分析了注入锁定后腔内模式匹配。在反射注入锁定的情况下，给出了数值计算的光强输出及其模拟，结果证明经位相锁定后，激光器输出光束的质量有了很大的提高。     

Theoretical Investigation of Transparent (3–5 μm) and High Reflective (1.3 μm) Filter by Sol-Gel Process

When designing a cut-off interference filter, extra layers are needed to add on each side of periodic symmetrical multilayer to match the incident medium and the substrate. In this paper, we use sol-gel film with adjustable refractive index as the match layer. The influence of the refractive index and thickness of the match layer on the film system is discussed in detail. As an example, a special filter which is transparent (>80%) at the wavelength 3–5 m and high reflective (>90%) at the wavelength 1.3 m is designed. Finally a series of optimized film parameters are presented. The whole design process is a good reference to the other multilayer special filter made by sol-gel process.     

基于集对分析的混合型多属性决策方法的研究

针对属性权重信息不完全且属性值为实数、区间数和模糊语言值相结合的混合型多属性决策问题,提出了一种基于集对分析的多属性决策方法.该方法所需计算量较少,方法简单,易于计算.最后通过实例验证了该方法的有效性和实用性.     

区域经济发展的属性模式识别模型

本将属性模式识别系统应用于区域经济发展优先级别的评价中。在建立评价指标体系的基础上。根据各指标的权重，提出确定区域经济发展中心的属性测度模型。并以黄河流域的12个大城市为样本，给出了一种比较科学的、切实可行的区域经济发展优先级别的评价方法。     

高校教学质量评价的属性识别法

阐述了高校教学质量评价的属性识别法.并应用此方法对普通高等学校的教学质量进行评价,指出了属性识别理论与模糊综合评判方法相比的优越之处.为普通高等学校教学质量评价提供了一种量化处理的方法.     

物流客户服务水平的综合评价研究

本文在客户问卷调查的基础上,结合国外有关的物流企业客户服务指标,建立了物流客户服务水平评价的指标体系,同时应用定性与定量分析相结合的方法,建立了属性综合评价的物流客户服务水平评价模型,并给出了具体的应用实例.     

折叠波导行波管切断匹配的设计

 利用电磁模拟软件,计算得到了H面渐变与E面渐变的楔形衰减器匹配效果,指出在相同渐变长度下,E面渐变匹配效果优于H面渐变。H面渐变衰减器反射主要来源于电场集中处,而E面渐变衰减器主要来源于渐变前部尖端处。在此基础上设计出了一种变形的匹配衰减器,即在E面渐变衰减器渐变开始处向前延伸一块薄片。计算结果与测试结果表明:与H面渐变和E面渐变的楔形衰减器相比,所设计衰减器在近截止频率处的匹配效果得到了明显的改善。     

基于属性优先级别关系和满意度的多属性决策方

本文研究了属性间有优先级别关系,各属性有满意度要求的多属性决策问题.利用属性间的优先级别关系和属性的满意度要求来确定低级别的属性对高级别的属性的补偿的大小的方法,获得了一种多属性决策信息集结方法,推广了相关文献的结果,使得决策结果更加符合实际的决策要求.